• Newsroom
  • Contact
  • safe&easy
  • DE EN 中文
Read more Products View all results

Services

Check out our product services

SCHURTER offers various services that supports the design-in work or the cooperation with sales partners.

Services

If you already have a SCHURTER order number or if you are looking for a SCHURTER alternative component, use the quick component search on the left:

ex: enter CMF1

details

 

Refine your search

Productgroups

Add more Close Add more

New

Add more Close Add more

Phase-out

These products are at the end of their lifecycle. We recommend you not to use them for new applications.

If products are not available for sales any more, the product information will still remain on the SCHURTER website.


Discontinued Products
Add more Close Add more

Approvals

Approvals indicate the conformity of the products with the national testing institution requirements by listing of the relevant approval logos.

appr =
Approvals
The link leads you to the search mask where you can query for certificates of the selected products.

Approvals
Detailed information about Approvals will be documented in the general product informations.

Details about Approvals
Add more Close Add more

Type

The Type describes the product line or the so-called series. It includes the different product variants, which are provided with a unique article respectively order number.

html = Data Sheet in HTML format

pdf = Data Sheet in PDF format

CAD = 3D 
CAD-Drawings
appr =  
Approvals
PCS =  
Product Content Sheet (PCS)
PCN =  
Product Change Notification (PCN)

RoHS

China RoHS
Add more Close Add more

Environment

Compliant with the Restriction of Hazardous Substances (RoHS) directive. See further details. 
RoHS
Compliant with the Restriction of Hazardous Substances (RoHS) directive. See further details. 
RoHS
Compliant with the Restriction of Hazardous Substances (CHINA-RoHS) directive. See further details.  
China RoHS
Add more Close Add more

V-Lock

V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.

Details of the V-Lock system can be found in the general product information.

V-Lock
Add more Close Add more

Medical version

Indicated products meet the requirements for use in medical devices according to the standard 60601-1. More details are listed in product data sheet.
Add more Close Add more

Rated Current IEC/UL

Normally, the maximum rated current is given in accordance with the admission test of the respective inspection. Accordingly, the international test requirements apply primarily according to the IEC standard. Alternatively, the rated current details are briefly UL also specified by the test requirements of the American testing by Underwriters Laboratories.

  In the meantime it has been shown that the nominal current range of a product is of interest, so we will show newly the minimum value. This corresponds, if present, the smallest approved rating of the product. Otherwise, a blank value or also the value 0 is used.

It was also necessary to distinguish between the rated currents for alternating current (AC) and direct current (DC), since different products may be used in both applications.
Add more Close Add more

Mounting

The products can be installed differently. Therefore the attachment method is primarily of interest. Next it must be clarified whether the component will need to be mounted from the front or the back or if it can be mounted on a circuit board.

Further criteria as snap method or snap-position are explained in order to distinguish the different offers also .

Full details for installation are explained in detail in the general product information.

Mounting

Position

Mounting position: Indicates orientation of screw holes of snappers in relation to the connector position

Mounting position 1



Mounting position 2



Deatils baout the subject can be looked up in the general product information

Mounting

Method

The products can be installed differently. Therefore the attachment method is primarily of interest. Next it must be clarified whether the component will need to be mounted from the front or the back or if it can be mounted on a circuit board.

Further criteria as snap method or snap-position are explained in order to distinguish the different offers also .

Full details for installation are explained in detail in the general product information.

Mounting

Snapper

Snap mounting might be separated in more detailes as follows:

One Step: Indicates types for sandwich mounting for one fixed panel thickness

Individual step: Indicates snappers for different panel thickness dimensions. e.g. 1.0mm, 1.5mm

Universal: Indicates serrated snappers fitting a range of panel thickness dimensions, e.g. 0.8mm - 1.2mm

Details see general product informations:

Mounting

Side

Add more Close Add more

Terminals

Terminals according IEC Standard.

Detailed information about terminals can be looked up in the date sheet or in the general product information.

Terminal
Add more Close Add more

Line Switch

Also includes circuit breaker switch and switch for Bowden cables.

Details about the switches can also be found in the general product information.

Line Switch
Add more Close Add more

Circuit Breaker

Circuit Breakers type and amount of switched poles

Details of Circuit Breakers can be found in the catalog or in the general product information

General Product Information
Add more Close Add more

Fuseholders

1.) fuse holder does not include circuit breakers

2.) Details about fuse-links can be found in the catalog under Non-Resettable Fuses

Detailed information on the fuse holder and fuse drawers can be found in the general product information.

Fuse drawer

Type

Add more Close Add more

Voltage Selector

You can refer to different input voltages

Details about the voltage selector can also be found in the general product information

Voltage Selector
Add more Close Add more

IEC Type

Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42

Details on connectors and their names can be found in the general product information

Mating Connectors
Add more Close Add more

Protection Class

Class I: with ground; Class II: without ground

Detailed information relating to protection class can also be found in the general product information


Protection Class
Add more Close Add more

Change Fuseholderstandard

The fuseholder standard 60127-6 Edition 2.0 has increased requirements according glow wire test and according the mounting directions that are difficult to overcome. This requires a verificartion and propbably an adaptation of the respective family. The approvals will be renewed according to this effort.

The mentioned group contains the several families implemented at the same time.
The status informs about the implemation progress for the respective family.

- open: The conversion work is in preparation
- wip: The examinations are carried out and the individual product variants are in conversion
- ready: The conversion of a product type has successfully been concluded
- n.a.: There will be no change

Details about the change can be watched on a separate Microsite:

Microsite Fuseholder

Group

Status

Add more Close Add more

Temperature

The temperature refers to the operating temperatures specified in the test conditions.
Details to temperatures as for IEC connectors can be found in the general product information

Mating Connectors
Add more Close Add more

USA only

Please note material marked with "USA only" is only available in USA
Add more Close Add more

cable

Definition of bulk cable

Cord Type

Definition of bulk cable

Length

Cord length

Color

Color description for connectors.

Flexible wires

Number and size of wires
Add more Close Add more

Hold Current

Add more Close Add more

Rated Voltage

Corresponds to the electrical voltage during normal operation.The nominal voltage is specified as the rated voltage and referenced in most cases to an IEC standard, which is referenced as a test basis for the operating parameters.

The nominal voltage is called depending on the operating condition, with AC voltage it is indicated VAC, and in the case of DC voltage as VDC.
Add more Close Add more

Style

Different designs may be selected for the component. It describes the mounting style. The selections correspond with the key table (E) on the data sheet.

Detailed information about mounting methodes can be looked up in the general product information.

General Product Information
Add more Close Add more

Pigtail

Add more Close Add more

Breaking Capacity

Value (r.m.s. for alternating current) of prospective current that a fuse-link is capable of breaking at a stated voltage under prescribed conditions of use and behaviour.

Details about the fuse selection can be looked up in the general product informations

General Product Information

Breaking Capacity

Add more Close Add more

Characteristic

The time-current-characteristic indicates the relation of the pre-arcing time (melting time) to the fault current.

Details about the selection of fuse links can be looked up in the general product information.

General Product Information
Add more Close Add more

Dimension

The dimension describes the outer measurements of the component.

In case of a fuse it can be the length and width, while it indicates the diameter for a round plug.

Dimension

Add more Close Add more

Power Acceptance

Power Acceptance according to IEC 60127-6

Details about fuseholders can be looked up in the general product information


Fuseholders
Add more Close Add more

Fuse-Link

Add more Close Add more

Terminals

Terminals according IEC Standard.

Detailed information about terminals can be looked up in the date sheet or in the general product information.

Terminal
Add more Close Add more

IP-Protection

The IP code consists of a two-digit number, which indicates the respective degree of protection.

The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects.

Details about IP protection degree can be looked up in the general product information

IP-Protection
Add more Close Add more

Number of Positions

Number of different voltages

Details about voltage selectors can be looked up in the general product informations

Voltage Selector
Add more Close Add more

Internal Circuit

Internal connectings
Add more Close Add more

Test Jacks Type

Add more Close Add more

Mounting Versions

The products can be installed differently. Therefore the attachment method is primarily of interest. Next it must be clarified whether the component will need to be mounted from the front or the back or if it can be mounted on a circuit board.

Further criteria as snap method or snap-position are explained in order to distinguish the different offers also .

Full details for installation are explained in detail in the general product information.

Mounting
Add more Close Add more

Technology

The technology describes the switching principle of the switch.
Add more Close Add more

Function

Add more Close Add more

Illumination

Illumination of the actuator
Add more Close Add more

Actuating Force

The actuating force is the force required at the actuator to change the switch from neutral position to the switched position.
Add more Close Add more

Color Actuator Overlay *

Add more Close Add more

Switching Voltage

Voltage between the contacts before closing or after opening.

Switching Voltage

Add more Close Add more

Indicator Type

Add more Close Add more

Mounting

Add more Close Add more

Number of Poles

Total of switched poles, protected or nonprotected
Add more Close Add more

Housings

Add more Close Add more

Number of Holders

Add more Close Add more

Arrangement

Add more Close Add more

Reflector

Add more Close Add more

Multiplier

Add more Close Add more

Contact

Add more Close Add more

Lifetime

The electrical lifetime of switches is expressed by the amount of switching cycles, which do not lead to the inadmissible increased contact resistance.

Lifetime

Add more Close Add more

Category

Add more Close Add more

Size

Add more Close Add more

Characteristic / Scheme

Add more Close Add more

Tripping Type

Add more Close Add more

Actuation type

Add more Close Add more

Attachment

Mounting style
Add more Close Add more

Options

Other functions on request

Add more Close Add more

Accessories

Add more Close Add more

Frontside

The IP code consists of a two-digit number, which indicates the respective degree of protection.

The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects.

I. index number: protection from the penetration of foreign objects 0 non-protected

1 ≥ 50 mm diameter (back of hand)
2 ≥ 12.5 mm diameter (finger)
3 ≥ 2.5 mm diameter (tool)
4 ≥ 1 mm diameter (wire)
5 dust-protected
6 dust-tight

II. index number: protection from water penetration with harmful effects

0 non-protected
1 vertically dripping
2 dripping (15° tilted)
3 spraying
4 splashing
5 jetting
6 powerful jetting
7 temporary immersion (1 m, 30 min)
8 continous immersion 9K: water at high pressure / steam jet cleaning (Water that is addressed against the housing from any direction under increased pressure, should have no harmful effects.
Add more Close Add more

Shock Protection

The degree of protection against external mechanical use is stated in IK values according to DIN EN 50102.

IK 00: no shock resistance
IK 01: impact with 150 g, out of 10 cm height, with impact energy ≤ 0,15 J
IK 02: impact with 200 g, out of 10 cm height, with impact energy ≤ 0,20 J
IK 03: impact with 250 g, out of 15 cm height, with impact energy ≤ 0,35 J
IK 04: impact with 250 g, out of 20 cm height, with impact energy ≤ 0,50 J
IK 05: impact with 350 g, out of 20 cm height, with impact energy ≤ 0,70 J
IK 06: impact with 250 g, out of 40 cm height, with impact energy ≤ 1 J
IK 07: impact with 0,5 kg, out of 40 cm height, with impact energy ≤ 2 J
IK 08: impact with 1,25 kg, out of 40 cm height, with impact energy ≤ 5 J
IK 09: impact with 2,5 kg, out of 40 cm height, with impact energy ≤ 10 J
IK 10: impact with 5 kg, out of 40 cm height, with impact energy ≤ 20
Add more Close Add more

Inductance

Lmin

Lmax

Add more Close Add more

Attenuation

Attenuation is the decrease in intensity of a signal
Add more Close Add more

Filter Stages

Quality of a filter
Add more Close Add more

Applications

Application references to specific fields that the products are designed for. White papers, technical references and success stories shall explain the use of the products in details.
Add more Close Add more

Voltage Time Integral

The Voltage-Time Integral Us*Tw

Add more Close Add more

Pulse Rise Time

The rise time is measured between 10% and 90% of the maximum pulse amplitude

Add more Close Add more

Turns Ratio

Turn ratio from the primary to the secondary winding of a trafo

Add more Close Add more

Filter Type

Filter classification according leakage current for easy reading:

Standard: < 0.5 mA
Medical: < 0.1 mA

Add more Close Add more

Description

Add more Close Add more

Connector Dimension

The dimension describes the outer measurements of the component.

In case of a fuse it can be the length and width, while it indicates the diameter for a round plug.

Dimension

Add more Close Add more

Plug / Connector

Connector type according to IEC 60320-1, UL498, CSA C22.2 no.42

Connector

Connector type according to IEC 60320-1, UL498, CSA C22.2 no.42

Plug

Description of country specific plug according to Region or Type.

Standard

Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42
Add more Close Add more

Connector

Connector type according to IEC 60320-1, UL498, CSA C22.2 no.42

Connector

Connector type according to IEC 60320-1, UL498, CSA C22.2 no.42

Add more Close Add more

Mounting␍Diameter

Mounting␍Diameter

Add more Close Add more

Plug

Description of country specific plug according to Region or Type.

Plug

Description of country specific plug according to Region or Type.

Add more Close Add more

Switching Current

Current that flows through the contacts after closing and before opening

Switching Current

Add more Close Add more

Standard

Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42

Standard

Add more Close Add more

Temperature

The given temperature range specifies the operating temperature of the switch.
Add more Close Add more

Terminal/Mounting

Add more Close Add more

Nennspannung

Maximal zulässige Nennspannung gemäss IEC- resp. UL/CSA-Zulassung für den genannten Typ. Detailliertere Variantenangaben sind im Datenblatt ersichtlich.
Add more Close Add more

Country

Number and size of wires

Country

Add more Close Add more

SCHURTER Catalog

10 results (out of 1115 series)
Sort by

Other Products

Transipillars

Transipillars, Spacers

productphoto
Transipillars
Transipillars
a rugged insulated mounting system
Compliance
productphoto

Other Products Transipillars Transipillars, Spacers Datasheet

Input Systems

Piezo Keypads

Metal Line Keypads

productphoto
Piezo Keypad
Piezo Keypad
Compliance
productphoto

Input Systems Piezo Keypads Metal Line Keypads Datasheet

Fuses

PFNF

Resettable Fuses

productphoto
Surface Mount Fuse
Surface Mount Fuse
PTC
1206 footprint, 3.2 x 1.6 mm, 30 VDC
Approval Approval
Compliance Compliance
productphoto

Fuses PFNF Resettable Fuses Datasheet

Fuses

PFUF

Resettable Fuses

productphoto
Surface Mount Fuse
Surface Mount Fuse
PTC
1210 footprint, 3.2 x 2.6 mm, 30 VDC
Approval Approval
Compliance Compliance
productphoto

Fuses PFUF Resettable Fuses Datasheet

Fuses

PFMF

Resettable Fuses

productphoto
Surface Mount Fuse
Surface Mount Fuse
PTC
1812 footprint, 4.6 x 3.2 mm, 60 VDC
Approval Approval
Compliance Compliance
productphoto

Fuses PFMF Resettable Fuses Datasheet

Fuses

UMK 250

Non resettable fuses

productphoto
Surface Mount Fuse with Clip
Surface Mount Fuse with Clip
4.2 x 11.3 mm
Quick-Acting F, UMK 250 = UMF 250 (Au) + UMC 250
Approval Approval
Compliance
productphoto

Fuses UMK 250 Non resettable fuses Datasheet

Fuses

ESO 10.3x38

Fuseholder Blocks & Clips

productphoto
Fuse Inserter/Extractor with Cover Function for 10.3x38 mm Fuses in Clips
Fuse Inserter/Extractor with Cover Function for 10.3x38 mm Fuses in Clips
Approval
Compliance
productphoto

Fuses ESO 10.3x38 Fuseholder Blocks & Clips Datasheet

EMC Products

FMAD CEE

3-Phase AC Filters / DC Filters

productphoto
1-stage filter with 3-phase CEE connector
1-stage filter with 3-phase CEE connector
Approval Approval
Compliance Compliance
productphoto

EMC Products FMAD CEE 3-Phase AC Filters / DC Filters Datasheet

Fuses

PFDF

Resettable Fuses

productphoto
Surface Mount Fuse
Surface Mount Fuse
PTC
2018 footprint, 5.1 x 4.6 mm, 60 VDC
Approval Approval
Compliance Compliance
productphoto

Fuses PFDF Resettable Fuses Datasheet

Fuses

UMT-H

Non resettable fuses

productphoto
Surface Mount Fuse
Surface Mount Fuse
5.3 x 16 mm
Time-Lag T, 277 VAC / 250 VDC, Breaking Capacity 1500 A
Approval Approval
Compliance
productphoto

Fuses UMT-H Non resettable fuses Datasheet

typ=4761 typ=4762 typ=4802.2351 typ=4802.2351.06 typ=4832.1210 typ=4832.2200 typ=4840.2231 typ=6020.0392 typ=6020.0394 typ=6600-5 typ=cover plates 160a typ=eg12 typ=fitting screw s ii typ=fitting screw s iii typ=fkg typ=fus typ=msm 16; 19; 22; 30 typ=msm 27 typ=msm dp m19 typ=pse iv 19 typ=s35 rocker 1pol typ=s35 wippe 1pol typ=scharnier zu skd 250|400 a typ=trennmesser zu sev g2|4|6 typ=ts-701-etc typ=uai 1206 typ=usn 1206 typ=wandlasche zu skd 250|400 a rated_current_iec_ac_min=5.3a rated_current_iec_ac_max=7.5a rated_current_iec_ac_max=600a methode=snap-in or screw-on mounting seite=from front or rear-side terminals=moulded terminals=solder tabs terminals=tht terminals=wire connections 3 x (16-12awg) polzahl_20326=1 sicherungshalter=5x20 mm sicherungshalter=5x20 or 6.3x32 mm rated_voltage_iec_dc_max=24vdc rated_voltage_iec_dc_max=48 v, see approvals ausschaltvermoegen_min=170a dimension=6.3 mm 32 mm dimension=11.3 mm 3.6 mm sicherungseinsatz=2 x 7 mm schutzgrad=ip 67, ip 69k function=high insulation rating (>2.2 kvac) between the primary and the secondary windings polzahl=1 pole lebensdauer=1.5million lebensdauer=20000 ip_schutzgrad=ip 64 ip 40 ip_schutzgrad=ip 67 ip_schutzgrad=ip 67 , windungsverhaeltnis=1:1 , 1:1:1 , 3:1:1 bezeichnung=fuse inserter|extractor with cover function for 10.3x38 mm fuses in clips bezeichnung=fuse inserter|extractor with cover function for 10.3x38 mm fuses in clips, patent pending bezeichnung=iec appliance inlet c14 with filter, line switch 1-pole bezeichnung=iec appliance inlet c20 with filter, eco design, front or rear side mounting standards=iec|en 60320-2-2|e einbau_durchmesser=16; 19; 22; 30mm einbau_durchmesser=m19mm schaltstrom=12a ac iec_min=250vac iec_min=600vac|dc ul_min=400vac

By changing the catalog version (Desktop <> Mobile), the system is resetting the chosen filters

en
prod //d1r84oewyu4qpi.cloudfront.net