Documents / References / CAD-Drawings

CAD-Drawings


Your Research
If you experience problems locating a drawing, please contact our inside sales department in the U.S. at 1-800-848-2600 for assistance.

Search:     
All [?] Order Number [?] Type [?] Configuration key [?]

Results per Page 10 20 50

Your Results (12)
Picture(s) [?] Type [?] Order Number [?] Configuration key [?] Comment Model Description [?] CAD Format [?]
            IGS [?] Step [?] Parasolid [?] DXF [?] WRL [?]
GSP1 GSP1.6XXX.X CAD-Model shows variation 4 through hole for cylindrical screw, without insulation cover, protection class I, termianl 6.3 mm E_0100.2056B007.ZIP
(304.84 kB)
E_0100.2056B005.ZIP
(171.19 kB)
E_0100.2056B006.ZIP
(164.20 kB)
E_0105.1305_2.1E001.ZIP
(28.11 kB)
E_0100.2056B008.ZIP
(24.36 kB)
GSP1 GSP1.7XXX.X CAD-Model shows variation 4 through hole for cylindrical screw, without insulation cover, protection class I, termianl 6.3 mm E_0100.2050C007.ZIP
(303.12 kB)
E_0100.2050C005.ZIP
(158.67 kB)
E_0100.2050C006.ZIP
(160.91 kB)
E_0105.1305_2.1E001.ZIP
(28.11 kB)
E_0100.2050C008.ZIP
(25.34 kB)
GSP1 GSP1.6XXX.X CAD-Model shows variation 4 through hole for cylindrical screw, without insulation cover, protection class I, terminal 4.8 mm E_0100.2056B003.ZIP
(298.87 kB)
E_0100.2056B001.ZIP
(166.64 kB)
E_0100.2056B002.ZIP
(158.61 kB)
E_0105.1305_2.1E001.ZIP
(28.11 kB)
E_0100.2056B004.ZIP
(23.56 kB)
GSP1 GSP1.9XXX.X CAD-Model shows variation 4 through hole for cylindrical screw, without insulation cover, protection class I, terminal 4.8 mm E_0100.2040D002.ZIP
(584.54 kB)
E_0100.2040D003.ZIP
(284.40 kB)
E_0100.2040D001.ZIP
(261.83 kB)
E_0105.1305_2.1E001.ZIP
(28.11 kB)
E_0100.2040D004.ZIP
(66.42 kB)
GSP1 GSP1.9XXX.X CAD-Model shows variation 4 through hole for cylindrical screw, without insulation cover, protection class I, termianl 6.3 mm E_0100.2040D006.ZIP
(586.35 kB)
E_0100.2040D007.ZIP
(286.22 kB)
E_0100.2040D005.ZIP
(268.00 kB)
E_0105.1305_2.1E001.ZIP
(28.11 kB)
E_0100.2040D008.ZIP
(67.10 kB)
GSP1 GSP1.7XXX.X CAD-Model shows variation 4 through hole for cylindrical screw, without insulation cover, protection class I, terminal 4.8 mm E_0100.2050C003.ZIP
(298.33 kB)
E_0100.2050C001.ZIP
(156.42 kB)
E_0100.2050C002.ZIP
(154.82 kB)
E_0105.1305_2.1E001.ZIP
(28.11 kB)
E_0100.2050C004.ZIP
(24.67 kB)
GSP1 GSP1.7XXX.X CAD-Model shows variation with 4 pre-inserted nuts M3, without insulation cover, protection class I, protective conductor with solder terminal 4.8 mm, 90° to the appliance connector axis. * Article with 2 nuts only on PCB side E_0100.2212C002.ZIP
(977.20 kB)
E_0100.2212C003.ZIP
(488.12 kB)
E_0100.2212C001.ZIP
(431.84 kB)
E_0105.1305_2.1E001.ZIP
(28.11 kB)
E_0100.2212C004.ZIP
(92.26 kB)
GSP1 GSP1.6XXX.X *GSP1.64XX.X CAD-Model shows variation with 4 pre-inserted nuts M3, without insulation cover, protection class I, protective conductor with solder terminal 4.8 mm, 90° to the appliance connector axis. * Article with 2 nuts only on PCB side E_0100.2053D002.ZIP
(949.22 kB)
E_0100.2053D003.ZIP
(448.01 kB)
E_0100.2053D001.ZIP
(422.39 kB)
E_0105.1305_2.1E001.ZIP
(28.11 kB)
E_0100.2053D004.ZIP
(90.69 kB)
GSP1 GSP1.8XXX.X CAD-Model shows variation 4 through hole for cylindrical screw, without insulation cover, protection class I, terminal 4.8 mm E_0100.2041D006.ZIP
(553.45 kB)
E_0100.2041D007.ZIP
(263.86 kB)
E_0100.2041D005.ZIP
(252.81 kB)
E_0105.1305_2.1E001.ZIP
(28.11 kB)
E_0100.2041D008.ZIP
(64.94 kB)
GSP1 GSP1.9XXX.X CAD-Model shows variation with 4 pre-inserted nuts M3, without insulation cover, protection class I, protective conductor with solder terminal 4.8 mm, 90° to the appliance connector axis. * Article with 2 nuts only on PCB side E_0100.2046D002.ZIP
(976.71 kB)
E_0100.2046D003.ZIP
(473.03 kB)
E_0100.2046D001.ZIP
(432.29 kB)
E_0105.1305_2.1E001.ZIP
(28.11 kB)
E_0100.2046D004.ZIP
(92.14 kB)