Screw-on mounting

Snap-in version
from rear side
PCB

KPF Filter Module
(not enclosed)

[DS_Series]: KP (Outlet)

IEC Appliance Inlet C14 with Appliance Outlet F

4 Variants

C14

70° C

[TabApprovals]

CAD

[Beschreibung] KP (Outlet)

Description

Panel mount: Sandwich/rear-side
2 Functions: Appliance Inlet Protection class I, Connector Protection class I
For PCB mounting

Characteristics

Panel mount from rear or "sandwich" between top and bottom/side to side panels
PCB mount with snap-in or screw-on feet (self tapping screws Ø 3 x 8 mm)
All single elements are already wired
Insulation cover on the rear-side
Suitable for use in equipment according to IEC/UL 62368-1

Other versions on request

Solder terminals
Quick-connect terminals
For protection class II

Detailed request for product

!DS-DETAILS-HEADLINE! KP (Outlet)

[Elektrische Details]

Ratings IEC

10 A / 250 VAC; 50 Hz

Ratings UL/CSA

15 A / 250 VAC; 60 Hz

Dielectric Strength

> 2.3 kVAC between L-N
> 2.8 kVAC between L/N-PE
(1 min/50 Hz)

Allowable Operation Temperature

-25 °C to 70 °C

IP-Protection

front side IP40 acc. to IEC 60529

Protection against electric shock

Suitable for appliances with protection class I acc. to IEC 61140

Terminal

For PCB mounting Quick connect terminals 4.8 x 0.8 mm
Solder terminal on request

Panel Thickness S

Snap-in: 1.5/2/2.5/3 mm

Material: Housing

Thermoplastic, black, UL 94V-0

Appliance inlet/-outlet

C14 and F acc. to IEC 60320-3
UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: KP01

Certificates	Certification Body	Description
VDE Approvals	VDE	Certificate Number: 40029368
UL Approvals	UL	UR File Number: E96454
CCC Approvals	CCC	CCC Certificate Number: 2019180204009568

Product standards

Product standards that are referenced

Design	Standard	Description
Designed according to	IEC 60320-1	Appliance couplers for household and similar general purposes
Designed according to	IEC 60320-3	Appliance couplers for household and similar general purposes
Designed according to	UL 60320-1	Standard for Attachment Plugs and Receptacles
Designed according to	CSA C22.2 no. 60320-1	General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Application standards

Application standards where the product can be used

Organization	Design	Standard	Description
	Suitable for applications acc.	IEC/UL 62368-1	Audio/video, information and communication technology equipment - Part 1: Safety requirements

Compliances

The product complies with following Guide Lines

Details	Initiator	Description
CE declaration of conformity	SCHURTER AG	The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity	SCHURTER AG	The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008.
RoHS	SCHURTER AG	Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS	SCHURTER AG	The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.

Dimensions [mm]

	Screw-on mounting

	A = for PCB-thickness 1.2/1.6/2.0/2.4 mm Additional quick connect terminal 4.8 x 0.8 mm

	Snap-in mounting

	Additional quick connect terminal 4.8 x 0.8 mm s = panel thickness

	For 2-pole inlet/switch, 2-pole inlet fuseholder and inlet/outlet

	d1 = 6 ± 0.05 für (snap-in) d1 = 3.6 (screw-on) d2 = 2.1 + 0.1/-0 (screw-on) Dimensions without tolerance: ≤ 15 = ± 0.05, ≥ 15 = ± 0,1

	For combinations Inlet/switch 1-pole, inlet/fuseholder 1-pole

	S and X see mounting holes

	Mounting holes for backside mounting

	Sandwich mounting holes

	X = 48.4 at S = 1.5 and 2.5 X = 50.4 at S = 2.0 and 3.0

	Sandwich mounting holes

	X = 48.4 at S = 1.5 and 2.5 X = 50.4 at S = 2.0 and 3.0

Assembly Instructions



	Stable snap feet requires minimal insertion force



	Module must lay flat on the PCB when soldering



	Screw-on mount uses self-tapping screws



	Insertion from behind



	"Sandwich" mounting with split enclosure panels

Diagrams



	Inlet with outlet

[Kurze Variantentabelle] KP (Outlet) [Öffne vollständige Tabelle] KP (Outlet)

Panel mounting	Panel Thickness s [mm]	PCB [mm]	Order Number Variant Details

Snap-in	2	1.6	KP01.1012.01	...
Snap-in	3	1.6	KP01.1013.01	...
Screw	2	1.2/1.6/2.0/2.4	KP01.1052.01	...
Screw	3	1.2/1.6/2.0/2.4	KP01.1053.01	...
Type KP without cover: KP01.XXXX.XX90 Ground Terminal with solder pin: KP01.XXXX.X3XX

Packaging unit

50 Pcs

[Variantentabelle] KP (Outlet)

Panel mounting	Panel Thickness s [mm]	PCB [mm]	Line Switch	Fuseholder	Connector	Order Number Variant Details	PU

Snap-in	2	1.6	-	-	F	KP01.1012.01	50
Snap-in	3	1.6	-	-	F	KP01.1013.01	50
Screw	2	1.2/1.6/2.0/2.4	-	-	F	KP01.1052.01	50
Screw	3	1.2/1.6/2.0/2.4	-	-	F	KP01.1053.01	50
Type KP without cover: KP01.XXXX.XX90 Ground Terminal with solder pin: KP01.XXXX.X3XX

Packaging unit

50 Pcs

References / Document Downloads

References KP (Outlet)

Alternative: version with line filter (1)

[Swipe to the left and right for more options]

KPF

KPF, SGE GST, PG06, Filtermodule zu Kombielement

[PassendeKomponenten] KP (Outlet)

Mating Inlets/Plugs (5)

[Swipe to the left and right for more options]

4732

4732, Mounting: Power Cord, Plug: IEC E, Cable

4735

4735, Mounting: Power Cord, Plug: IEC E, Cable

9009

9009, Mounting: Plug: IEC E, Screw clamps

4733

4733, Mounting: Power Cord, Plug: IEC E, Cable

4736

4736, Mounting: Power Cord, Plug: IEC E, Cable

Mating Outlets/Connectors (8)

[Swipe to the left and right for more options]

4787

4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I

4788

4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder / Quick Connect, 10 A, Suitable for appliances with protection class I

5091

IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal

4782

4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4785

4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4300-06

4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4781

4781 Mounting: Power Cord, Cable, Connector: IEC C15

4784

4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15

13.05.2024

Transformation_Date:	2024-05-13 16:26:51
Export_Path:	/Datasheets_PrGrp_Workflow/DS_PrGrp_WF_GST/DS_PrGrp_WF_GST_PG05_Export/2024_05_13/11_39_02_142_551321/PGRSplits/
Export_Lang:	en
SGE_Name:	Connectors
PG_Name:	Power Entry Modules without Line Filter
Typ_Name:	KP (Outlet)
Typ_AliasNames:	:kp (outlet):,:KP(Outlet):,:kp(outlet):,:KP__Outlet_:,:kp__outlet_:,:KP_Outlet_:,:kp_outlet_:
Typ_ID:	317
Typ_Hierarchie:	020051160000001133
Typ_EPIM_Order:	230
Typ_Titel:	IEC Appliance Inlet C14 with Appliance Outlet F
PublPrgr_Name:	Power Entry Module without Filter
PublPrgr_Shortcut:	PG05
Variant table:	Variantentabelle V02 (18698)