For some SCHURTER device socket outlets for PDUs, the installation of light pipes is possible.
The light pipes installed in the outlet are designed to channel light coming from LEDs mounted on a printed circuit board to the surface of the outlet. Each outlet generally has its own circuitry and, depending on the complexity of the monitoring system, may require several types of indicating functions. The outlets are capable of providing up to four light pipes, one in each of the four corners of the connector. The side of the outlet with the ground pin provides extra space around the two corners, allowing for the most prominent and thus popular position.
In addition, there is no need for separately installed optical fibers or LEDs which reduces costs.
V-Lock cord retention system for IEC connector
The V-Lock cord retention system can be plugged in to IEC 60320 at 10A and 16A.
With V-Lock, the power connector is equipped with a pin that interlocks with a special notch in the inlet on the power cord and thus reliably prevents the cord from being pulled out unintentionally. The advantage of this scheme is that no clamping system specific to a unit’s power inlet or retaining bracket must be adapted and attached. The lock is released by pressing a finger on the disengaging lever. This lever is easily identified due to its bright yellow colour, a feature that also distinguishes this scheme from conventional pluggable power supply systems.
The V-Lock cord retention system prevents unintentional pulling out or loosening of the power cord in a simple way.
IEC socket blocks for device installation
Appliance Outlet 6610
Perfect load balancing in PDUs
4710-5: 16 A IEC appliance outlet for intelligent PDUs
High availability and reliability are essential in our business. In SCHURTER, we have a long-term partner, on which we can rely.
IDC plug connectors are so-called insulation displacement connections. The insulated conductor is pressed into the insulation clamp without prior confection. The insulation is cut at the terminal and the electrical connection is ensured by means of the clamping connection to the wire. For a perfect connection the conductor cross-sections from the data sheet have to be taken into account accordingly.
IDC connectors have proven their worth in many applications (e.g., power distribution units). Due to this connection technology, the wiring effort is significantly reduced and the contacting is very reliable.
Overcurrent protection and colour coding
A primary fuse on the respective phase ensures that the permissible supply capacity of 2.5 kW, for example, is not exceeded. Likewise, an overload of modern power distribution strips can be avoided with multiple IEC outlets can be prevented by blocking unused outlets with protective caps known as Tamper Resistant Outlet Locks.
Power distribution strips in 3-phase systems are ideal for color-coding the individual phases. Various IEC sockets of SCHURTER types J and F are therefore no longer only available in black, but also in white and grey. In the often poorly lit server and control cabinets of a data center, this makes it easier to visually distinguish the individual phases.
SCHURTER的产品与服务符合最高质量要求，因为SCHURTER应用了质量-环境-安全管理系统，如ISO 9001、ISO 14001、OHSAS 18001、六西格玛方法和EFQM卓越模型。所有产品均实行国别测试标签，如德国电气工程师协会（VDE）、欧洲标准电器认证（ENEC）、UL、国家强制性产品认证（CCC）等。此外，由于集团各公司和分销商的国际合作网井然有序，客户可从卓越服务和交货期短中获益。
Downloads / Links