IEC device plug E for cable mounting
Screw-on mounting
straight

Example with assembled cable

Series: 4732

IEC Plug E, Cord Connector (Rewireable), Straight, max. cable Diameter 8.5 mm

Connectors (Inlets/Outlets)

70° C

Approvals and Compliances

CAD

Description 4732

Description

Cord Connectors (Rewireable): Screw-on mounting
1 Function
Appliance Inlet, Pin temperature 70 °C, Protection class I
Cable

Detailed request for product

References / Document Downloads

Date	Subcategory	Language	Title

22/07/2019	PCN	English	PCN Change of product location of several products
09/08/2018	White Paper	English	White Paper Cord retention
13/07/2018	PCN	English	All connectors PG07 PCN Change of configuration code PG07
06/04/2018	White Paper	English	White Paper Mating Connectors English
21/11/2016	Mounting instruction	English	Mounting Instruction 4732 4735
05/07/2016	PCS	English	4732 / 4735 PCS

Details 4732

Technical Data

Approvals and Compliances

CAD-Drawings

Dimension

Electrical Data

Ratings IEC

The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.

General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA

General information on the rated current and the rated voltage at EMC products
Rated Voltage
Rated current

The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.

Search approval information for different families

Approvals

10 A / 250 VAC; 50 Hz

Ratings UL/CSA

Ratings UL

10 A / 250 VAC; 60 Hz

Dielectric Strength

Information abou the maximum permissible voltage, to avoid a voltage breakdown due to insulation damage.

Dielectric Strength

> 2 kVAC between L-N
> 2 kVAC between L/N-PE
(1 min/50 Hz)

Allowable Operation Temperature

-25 °C to 70 °C

Insulation cover

Protection Class

Class I: with ground; Class II: without ground

Detailed information relating to protection class can also be found in the general product information

Insulation cover

Suitable for appliances with protection class I acc. to IEC 61140

Terminal

Terminals

Terminals according IEC Standard.

Detailed information about terminals can be looked up in the date sheet or in the general product information.
Terminal

Cable

Material: Housing

Thermoplastic, black, UL 94V-0

appliance inlet/-outlet

Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42

Details on connectors and their names can be found in the general product information
Appliance Couplers
Mating Connectors
Term explanation
Special Connector Designs

E acc. to IEC 60320-3,
UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals

SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: 4732

Certificates	Certification Body	Description
VDE Approvals	VDE	VDE Certificate Number: 40010731
UL Approvals	UL	UL File Number: E96454
CCC Approvals	CCC	CCC Certificate Number:

Product standards

Product standards that are referenced

Design	Standard	Description
Designed according to	IEC 60320-3	Appliance couplers for household and similar general purposes
Designed according to	UL 498	Standard for Attachment Plugs and Receptacles
Designed according to	CSA C22.2 no. 42	General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Application standards

Application standards where the product can be used

Organization	Design	Standard	Description
	Designed for applications acc.	IEC/UL 60950	IEC 60950-1 includes the basic requirements for the safety of information technology equipment.

Compliances

The product complies with following Guide Lines

Details	Initiator	Description
CE declaration of conformity	SCHURTER AG	The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
RoHS	SCHURTER AG	Directive RoHS 2011/65/EU, Amendment (EU) 2015/836
China RoHS	SCHURTER AG	The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
REACH	SCHURTER AG	On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.

Preview Picture(s) Selection of product pictures to display a specific variant of the type	Type Type Corresponds to a product series and includes various distinct variants. On the type of descriptive data are summarized, eg in the data sheet	Order Number Order Number Unique part number for placing an order	Configuration key Configuration key The configuration key of a product consists of the composite key values, which describe the different kinds of attribut distinction.	Comment Comment CAD drawings are for modeling purposes only	Model Description Model Description Abbreviated description of the CAD model	IGS IGS Also mentioned as IGES ( Initial Graphics Exchange Specification). Common program indipendent interchange format for 3D CAD data.	Step Step Also mentioned as STEP ( Standard for the Exchange of Product Model Data). Common program indipendent interchange format for 3D CAD data standardized according ISO standard.	Parasolid Parasolid Parasolid modeling kernel is a 3D CAD systems. It is developed by a separate business unit within the Unigraphics Solutions (UGS), now Siemens PLM Software.	DXF DXF (Drawing Interchange Format) is a specified by the Autodesk file format for CAD data exchange, and was developed for the 2D-CAD program AutoCAD. A DXF file describes a CAD model as plain text to the ASCII standard.
	4732	4732.0000 4732.0001	4732.0X00

Dimensions [mm]

	4732

Short Table of Variants 4732 Open complete table 4732

Color	Recommended cable diameter	Max. wire size	Order Number Variant Details The link on the respective order number refers to a separat tab with specific detailed information . This assures better readable information of the selected product. Change to the tab All Products in order to show details of another variant. This approach offers to use generic alias link to the product details: www.schurter.xx/art/ [Order Number] where the following variables are used: - xx is the country specific domain - [Order Number]	A=Most Popular A=Most Popular Most popular products have the following customer benefits: - previously ordered by multiple customers - generally in stock for immediate delivery - early adoption or mature life cycle Contact us for availability on other product variants, lead-times vary: Contact-Form Availability for all products can be searched real-time. Enter part number and required quantity: Stock Check SCHURTER	Free Sample Free Sample Please ask for free sample in order to check if the products meets your requirement for your application. Send your delivery adress and your specific requirements.	Distributor Stock Check Distributor Stock Check The following links reffers to the inquiry form for distributors stock information of the selected products. It allows checking for the available amount and optionally to place an order at your selected partner. The Distributor Stock Check Stock Check Distributor	...
black	8.5 mm	3 x 1 mm² / 3 x 18 AWG	4732.0000	A			...
█ Most Popular. Max. torque for screws: Terminals: 0.5 Nm, Cable clamps: 0.3 Nm, Cover: 0.3 Nm

Color

Recommended cable diameter

Max. wire size

Order Number

Variant Details

The link on the respective order number refers to a separat tab with specific detailed information .

This assures better readable information of the selected product.
Change to the tab All Products in order to show details of another variant.

This approach offers to use generic alias link to the product details:

www.schurter.xx/art/ [Order Number]

where the following variables are used:
- xx is the country specific domain
- [Order Number]

A=Most Popular

Most popular products have the following customer benefits:

- previously ordered by multiple customers
- generally in stock for immediate delivery
- early adoption or mature life cycle

Contact us for availability on other product variants, lead-times vary:
Contact-Form

Availability for all products can be searched real-time. Enter part number and required quantity:
Stock Check SCHURTER

Free Sample

Please ask for free sample in order to check if the products meets your requirement for your application. Send your delivery adress and your specific requirements.

Distributor Stock Check

The following links reffers to the inquiry form for distributors stock information of the selected products. It allows checking for the available amount and optionally to place an order at your selected partner.

The
Distributor Stock Check
Stock Check Distributor

...

black

8.5 mm

3 x 1 mm² / 3 x 18 AWG

4732.0000

...

█ Most Popular.

Max. torque for screws: Terminals: 0.5 Nm, Cable clamps: 0.3 Nm, Cover: 0.3 Nm

Table of Variants 4732

Color	Recommended cable diameter	Max. wire size	L = Length of cable guard	Order Number Variant Details The link on the respective order number refers to a separat tab with specific detailed information . This assures better readable information of the selected product. Change to the tab All Products in order to show details of another variant. This approach offers to use generic alias link to the product details: www.schurter.xx/art/ [Order Number] where the following variables are used: - xx is the country specific domain - [Order Number]	A=Most Popular A=Most Popular Most popular products have the following customer benefits: - previously ordered by multiple customers - generally in stock for immediate delivery - early adoption or mature life cycle Contact us for availability on other product variants, lead-times vary: Contact-Form Availability for all products can be searched real-time. Enter part number and required quantity: Stock Check SCHURTER	MOQ MOQ Minimum order quantity. It is necessary to meet the MOQ when placing orders. Please contact us for assistance: Contact-Form	Free Sample Free Sample Please ask for free sample in order to check if the products meets your requirement for your application. Send your delivery adress and your specific requirements.	PU Packaging unit The packaging unit is the amount of parts in a standard package. It can also be the multiple of the MOQ (minimum order quantity). Please contact SCHURTER for further assistance: Contact-Form	Distributor Stock Check Distributor Stock Check The following links reffers to the inquiry form for distributors stock information of the selected products. It allows checking for the available amount and optionally to place an order at your selected partner. The Distributor Stock Check Stock Check Distributor
black	8.5 mm	3 x 1 mm² / 3 x 18 AWG	-	4732.0000	A	1		100
█ Most Popular. Max. torque for screws: Terminals: 0.5 Nm, Cable clamps: 0.3 Nm, Cover: 0.3 Nm

Color

Recommended cable diameter

Max. wire size

L = Length of cable guard

Order Number

Variant Details

A=Most Popular

MOQ

Minimum order quantity. It is necessary to meet the MOQ when placing orders.

Please contact us for assistance:
Contact-Form

Free Sample

Please ask for free sample in order to check if the products meets your requirement for your application. Send your delivery adress and your specific requirements.

Packaging unit

The packaging unit is the amount of parts in a standard package. It can also be the multiple of the MOQ (minimum order quantity).

Please contact SCHURTER for further assistance:
Contact-Form

Distributor Stock Check

black

8.5 mm

3 x 1 mm² / 3 x 18 AWG

4732.0000

100

█ Most Popular.

Max. torque for screws: Terminals: 0.5 Nm, Cable clamps: 0.3 Nm, Cover: 0.3 Nm

References 4732

Substitute for type (0)

[Swipe to the left and right for more options]

Mating Components 4732

Mating Outlets/Connectors (31)

[Swipe to the left and right for more options]

6600-5

6600-5, Mounting: Snap-in version, Appliance Outlet: IEC F, For PCB mounting, 10 A, Suitable for appliances with protection class I

6600-3

6600-3, Mounting: Screw-on mounting, Appliance Outlet: IEC F, Solder terminals or quick connect terminals, 10 A, Suitable for appliances with protection class I

4787

4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I

4788

4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder terminals or quick connect terminals, 10 A, Suitable for appliances with protection class I

6600-4

6600-4, Mounting: Snap-in version, Appliance Outlet: IEC F, Solder terminals or quick connect terminals, 10 A, Suitable for appliances with protection class I

4721

4721, Mounting: Screw-on mounting, Appliance Outlet: IEC F, Solder terminals or quick connect terminals, 10 A, Suitable for appliances with protection class I

4723

4723, Mounting: Snap-in version, Appliance Outlet: IEC F, Solder terminals or quick connect terminals, 10 A, Suitable for appliances with protection class I

4022

4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13

4782

4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4012

4012 Mounting: Power Supply Cord, 3 x 1 mm², Screw clamps, Connector: IEC C13

4785

4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4300-06

4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4781

4781 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15

8101

8101 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C15

4784

4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15

4771

4771 Mounting: Power Supply Cord, 3 x 1 mm² / 3 x 14 AWG, Screw clamps, Connector: IEC C15A

4772

4772 Mounting: 3 x 1 mm² / 3 x 14 AWG, Screw clamps, Connector: IEC C15A

6650

Gerätestecker,diverse, SGE GST, PG05, Einzelelem zu Kombielement Leiterplatte Felcom

G-Steckdose, Mounting: Appliance Outlet : IEC F Without fuse holder

5001

5001, Mounting: Screw-on mounting from rear-side, For PCB mounting, : F

4751

4751, Mounting: Snap-in, Front Side, Solder pin or quick connect terminals 6.3 x 0.8 or 4.8 x 0.8 mm, x Appliance Outlet: IEC F

0712

0712-PQ, Mounting: Snap-in, Front Side, Solder terminal (4.8 x 0.8 mm), 1x Appliance Outlet: IEC F

4741

4741, Mounting: 2x Appliance Outlet: IEC F

0909

0909, Mounting: Snap-in, Front Side, Solder terminals, 7x Appliance Outlet: IEC F

4752

4752, Mounting: Snap-in, Front Side, Solder terminals or quick connect terminals, 4x Appliance Outlet: IEC F

4747

4747, Mounting: 4x Appliance Outlet: IEC F

4748

4748, Mounting: 4x Appliance Outlet: IEC F

4740

4740, Mounting: 6x Appliance Outlet: IEC F

KP (Outlet)

KP (Dose), SGE GST, PG05, Kombielement Leiterplatte 10A ohne Filter

IEC Appliance Inlet C14 with Appliance Outlet F

Felcom 64

Felcom 64, Mounting: 0 mm, Fuseholder: Solder terminals 3.5 x 0.8 mm or quick connect terminals 6.3 x 0.8 mm, Rocker switch: 2-pole non-illuminated, Appliance Inlet: IEC C14, Power Entry Module

4719

4719, Mounting: Snap-in, mm, Fuseholder: 1-pole, Appliance Outlet: IEC F, with or without neon indicator, Suitable for appliances with protection class I

Felcom 54

Felcom 54, Mounting: mm, Front Side, Filter: Standard Version, Fuseholder: 1 or 2 pole, Front Side, 10 A, Rocker switch: 2-pole, Solder terminals 3.5 x 0.8 mm or quick connect terminals 6.3 x 0.8 mm, Appliance Inlet: IEC C14

Accessories 4732

Accessories (3)

[Swipe to the left and right for more options]

Cord retaining kits

Cord retaining strain relief

4700.0004

Countersunk, D

4700.0005

Flat head, E

Transformation_Date:	2019-05-30 13:02:35
Export_Path:	\Datasheets_PrGrp\DS_PrGrp_Connection\DS_PrGrp_PG07b_Export\2019_05_30\12_00_11_697_502923\PGRSplits\
Export_Lang:	en
SGE_Name:	Connectors
PG_Name:	Cord Connectors (Rewireable)
Typ_Name:	4732
Typ_AliasNames:	:4732:
Typ_ID:	440
Typ_Hierarchie:	020070370000002232
Typ_EPIM_Order:	40
Typ_Titel:	IEC Plug E, Cord Connector (Rewireable), Straight, max. cable Diameter 8.5 mm
PublPrgr_Name:	Cord Connectors
PublPrgr_Shortcut:	PG07b