- Products and Solutions
- Components
- Input Systems
- Solutions
- Smart Products
- Markets
- Competences
- Engineering
- Manufacturing
- Supply Chain Management
- Qualification and Testing
- Services
- Info Center
- Product Conformity
- Support Tools
- Help Center
- About us
- Company
- Careers
- Contact
Search
Extensive range of Connectors
More than 10 different connector categories
Our different types of Connectors will meet your needs
Our connector range includes a wide variety of connectors according to IEC 60320. The extensive range of connectors is supplemented by further functional components such as switches, fuse holders, filters, plug-in systems, device connection cables & more.
Type DG11/DG12 with Cordset
Protection against dirt particles and moisture is becoming increasingly important. With the product type DG11 and DG12 and the associated V-Lock power cable, SCHURTER is launching an IP54 device connection that also meets very high demands.
The SCHURTER Products DG11 and DG12 have been upgraded for an IEC 60320 and IEC 60529 compatible appliance inlet. In combination with the dedicated power cord, an IP54 protection rating is achieved when plugged in. An IP54 connection provides excellent protection against dust particles and is splash-proof.
Power Entry Modules without Filter
Power Entry Modules (PEM) from SCHURTER are based on IEC connectors with additional functions. They are available for screw-in, snap-in, PCB, or sandwich mounting.
The 4750 connector made for the Data Center industry by SCHURTER
The demands on power distribution units are very individual is an indispensable requirement in today’s data center world. The Type 4750 connector supports all common systems – top- and side-latching. Many terminals can be selected: PCB, solder or quick connect. Thanks to hard-wired bus variants, the wiring effort can be minimized. A cost-effective way. In complex power distribution systems, the visualization of the status is of great importance: Type 4750 offers light pipes at all possible positions of the outlet. Color codes help to keep track of outlets in 3-phase systems. The distribution strip 4750 is therefore available in white, gray, or black. The number of outlets per strip-block varies between 2 and 7.
Connectors (Inlets/Outlets)
IEC connectors from SCHURTER meet international safety standards. Available current ratings range from 2.5 Amps to 20 Amps, for screw-in, snap-in, PCB, or sandwich mounting.
Cord Connectors (Rewireable)
IEC connectors from SCHURTER meet international safety standards. Available current ratings range from 2.5 Amps to 20 Amps, for screw-in, snap-in, PCB, or sandwich mounting.
Sustainable Green Line Connectors
The Green Line Appliance Connectors are the first sustainable collection of SCHURTER quality products based on plant-based plastics. The Green Line is part of SCHURTER's sustainability strategy. SCHURTER's mission is to deliver high-quality products with significantly lower CO₂ emissions. Specifically, the goal is to reduce the CO₂ footprint of the portfolio by 50% by 2035. This will be achieved, among other things, with more sustainably produced products. A commissioned study by myclimate showed that the starting material causes the highest CO₂ emissions in the product cycle. SCHURTER is tackling this challenge with the new Green Line.
Quick access: Distributors and stock check Distributors
Data center, CEE-Connectors and Power Distribution Units
Power Distribution Units for Data Center
The supply of a data center using direct current has enormous potential for savings.
CEE-Connector with Filter
SCHURTER expands its range of power entry modules with the introduction of the FMAD and FMAB CEE connectors, featuring a first of its kind integrated line filter for 1- and 3-phase industrial and power distribution.
Power Distribution Units
SCHURTER Power Distribution Units meet international safety standards, according to IEC, and CSA where applicable. Available current ratings range from 2.5A to 20AIP-Ingress Protection Rating, PEMs and V-Lock
IP-Ingress Protection Rating
Waterproof push/pull appliance coupler with various Ingress Protection Rating
Power Entry Modules
Plugs and sockets, SMD fuses and fuseblock with gold plated contacts, power entry module filter with ground line choke
V-Lock
Cord-retention safeguard for IEC appliance couplers - reliably prevents the cord from being pulled out unintentionallyOur Connectors product catalog
Distribution Units
IEC Power distribution units from SCHURTER meet international safety standards, according to IEC, and CSA where applicable. Available current ratings range from 2.5 Amps to 20 Amps.
Cord Sets
AC cord sets from SCHURTER meet international safety standards. Available current ratings range from 2.5 Amps to 20 Amps.
Data and Signal Plug/Socket
SCHURTER supplies shielded and unshielded data and signal plugs and sockets, 1 to 6 pole in diameters of 2.5 mm, 3.5 mm and 6.3 mm.
Audio Plugs/Sockets
SCHURTER supplies shielded and unshielded audio plugs and sockets, 1 to 3 pole in diameters of 2.5 mm, 3.5 mm and 6.3 mm.
DC Plugs/Sockets
SCHURTER supplies 2 and 3-pole DC-plugs and sockets in diameters 5.5 mm, 6.0 mm and 7.0 mm.
Test Jacks & Probes
Test jacks and plugs form SCHURTER are made of quality materials meant to last, and manufactured to tight tolerances for reliable operation. A variety of styles and colors is available for PCB or panel mounting.
Accessories Connectors
The suitable accessories to the SCHURTER Connectors. Please note that there are certain products to force the necessary accessories which are required for the proper functioning of the product. Must be ordered separately.
Share on LinkedinCopy link
Send via e-mail
You will be transferred to the selected country page address. Therefore you will leave the SCHURTER main page.