- Catalog
- Components
- HMI
- Markets
- Industrial Equipment
- Medical Equipment
- Automotive
- Info Center
- Product Conformity
- Support Tools
- Help Center
- Distributors
- About us
- Company
- Competences
- Careers
- Working at SCHURTER Switzerland
- Working at SCHURTER Germany
- Contact
Search
Laboratory
Reliable HMI solutions and electronic components for precise and efficient laboratory equipment
Products for Medical Laboratory Devices
Designed for Laboratory Requirements
Medical laboratory devices place high demands on usability, hygiene, and electromagnetic compatibility. SCHURTER offers a wide range of HMI (Human Machine Interfaces) and electronic components designed to meet these needs.
Products for Power Supply
DG11 with Magnetic Release
The SCHURTER DG11 power entry module, which has been optimized and proven over many years, is now available in a version with an additional magnetic release to protect against very high overcurrents (short circuit) at the integrated TA35 circuit breaker.
KD Series - Power Entry Module with Fuse Holder
Combines 4 functions in one PEM: Appliance Inlet Protection class I, Line Switch 2 pole, Fuseholder with interchangeable fuse drawer for Fuse-links 5x20 mm or 6.3x32 mm, with or without voltage selector (step).
5180: Appliance Inlet Filter with IP67
Protection against dirt particles and moisture is becoming increasingly important. With product type 5180 and the associated V-Lock power cord, SCHURTER is launching an IP54 device connection that meets even the most demanding requirements.
VAC13KS Cord Set
IEC power supply cord C13 with protection class I.The V-Lock locking system ensures a secure power connection. Available in numerous versions for different countries.PEM with Magnetic Release Video
The SCHURTER DG11 power entry module, which has been optimized and proven over many years, is now available in a version with an additional magnetic release to protect against very high overcurrents (short circuit) at the integrated TA35 circuit breaker.
Circuit breakers are usually designed according to the thermal principle with a bimetal. If a defined temperature is exceeded due to the overcurrent, the circuit is interrupted. Once the bimetal has cooled down, the device is ready for use again. However, this process is very slow. For this reason, thermal circuit breakers are usually combined with a fuse.
Watch our video to this new product introduction.
Products for I/O Switches
CPS with Capacitive Touch
SCHURTER CPS is a vandal-resistant capacitive touch switch with optional illumination. Stainless-steel housing, 5–28 VDC supply, potential-free OptoMOS output, plus IP67 (front) and IK09 protection for harsh industrial use.
PSE with Piezo Technology and Cable
SCHURTER PSE with cable is a momentary normally open piezo switch for tough environments. It is IP67 sealed up to the cable connection, comes in a stainless steel housing, uses a potted PUR cable (15 m), and offers RGB ring illumination (5–28 VDC).
TA35 with Thermal Protection (1-Pole)
SCHURTER TA35 Rocker 1Pole is a 1-pole thermal circuit breaker in snap-in design with positively trip-free release. Wide current range and options for rocker color, marking and illumination. UL rated up to 277 VAC, IP65 with cover.
TA45 with Thermal Protection (2-Pole)
SCHURTER TA45 2 pole Rocker is a thermal circuit breaker with trip-free release and snap-in mounting. Optional illuminated rocker. Rated 240 VAC / 60 VDC, current range 0.05 to 20 A. Front IP40, IP54 with cover.Products for Battery Management
FEU (Med) with Shock-Safe Fuseholder for Medical Equipment
SCHURTER FEU (Med) is a shock-safe (PC2) panel-mount fuseholder for 5x20 and 6.3x32 mm fuses. Rated 250 VAC and up to 600 VAC/DC, 10 A (VDE) and 20 A (UL/CSA), IP40. Suited for medical equipment.
UMT-H with Time-Lag SMT Fuse for Reliable Circuit Protection
SCHURTER UMT-H is a compact SMT time-lag fuse for reliable primary protection on PCBs. It handles pulse-shaped currents, offers high breaking capacity up to 1500 A, and is rated up to 277 VAC / 250 VDC.
PFRA with Resettable Overcurrent Protection
SCHURTER PFRA is a resettable PTC fuse for PCB mounting (THT). It protects against overcurrent and short circuits in electronics and automotive designs. Voltage range 16–60 VDC, holding current 0.1–11 A, -40 to 85 °C.
Supercap Series - Fast Energy Storage for Peak Power and Backup
SCHURTER Prismatic Supercapacitors (with CAP-XX) store and release energy fast in an ultra-thin, lightweight format. High power density, low ESR and low self-discharge make them ideal for peak power and short backup in compact devices.Products for General Electronics
FPG4 Series - Fuseholder for 5 x 20 mm Fuses
SCHURTER FPG4 is a compact PCB fuseholder for 5 x 20 mm fuses. Closed, touch-safe design (PC2) with vertical mounting and a slotted or fingergrip cap. For household and medical devices. Rated up to 250 VAC, 10 A.
OGN Series with Open Fuseholder for 5 x 20 mm Fuses
SCHURTER OGN is an open PCB fuseholder for 5 x 20 mm fuses. It comes in THT, SMT or THR versions for easy, automated assembly and low height. Designed for unattended appliances and higher glow-wire requirements (IEC 60335-1).
FST Series - Slow-Blow Fuse (5 x 20 mm)
SCHURTER FST 5x20 is a time-lag (slow-blow) miniature fuse for dependable protection of power supplies and electronics. Rated 250 VAC, available 0.05–20 A, designed to ride through inrush currents and open safely on faults.
SPT 5x20 Series - Robust Miniature Fuse for Everyday Protection
SCHURTER SPT 5x20 is a slow blow 5x20 mm fuse for dependable protection of power supplies and electronics. Rated 250 VAC (300 VDC), 0.5 to 16 A, with high breaking capacity, and made for demanding circuits.Questions? More Information? Get in touch with us!
Products for Heating Elements
DC12 Series with Power Entry Module, Filter and Switch
SCHURTER DC12 is a compact power entry module with C14 inlet, line filter and 1 or 2 pole switch. It mounts from front or rear, comes prewired, supports V-Lock cord retention, and is available in black or white.
DF11 Series with Power Inlet and Built-in Circuit Protection
SCHURTER DF11 is a compact power entry module with IEC C14/C18 inlet and a 2-pole circuit breaker (TA45), prewired for easy panel mounting (snap-in or screw). Optional V-Lock notch helps prevent accidental unplugging.
FMAB NEO Series with Compact Line Filter for Clean Power
SCHURTER FMAB NEO is a compact single-phase line filter that reduces mains interference in devices with switching electronics. Closed steel housing, Class I or II options, industrial or medical versions, 1–60 A at 250 VAC, -40 to 100 °C.
FMBB EP Series with Compact Mains Filter
SCHURTER FMBB EP is a compact single phase, two stage mains filter that reduces line noise and helps devices run smoothly. Rated 1 to 36 A at 250 VAC, it suits drives, inverters and UPS systems, and can also be used in medical equipment.Products for Motor Drives
FMAD NEO Series with 3-Phase Mains Filter
SCHURTER FMAD NEO is a compact 3-phase mains filter (with neutral) that cuts line noise and helps industrial equipment run smoothly. Designed for converters, drives and UPS systems. Rated up to 520 VAC, 16–230 A, with low-leakage options.
FMBB NEO Series with Compact Mains Filter for Cleaner Power
SCHURTER FMBB NEO is a compact single-phase mains filter that reduces electrical noise and helps equipment run reliably. 2-stage design, 1–36 A at 250 VAC, with standard or medical versions and several terminal options.
FMBD EP Series with 3-Phase Mains Filter
SCHURTER FMBD EP is a compact 2-stage 3-phase mains filter that reduces line noise so equipment runs more reliably. It is designed for industrial drives, converters and UPS systems, rated 520/760 VAC and 16-230 A.FMBB EP Series with Compact Mains Filter
SCHURTER FMBB EP is a compact single phase, two stage mains filter that reduces line noise and helps devices run smoothly. Rated 1 to 36 A at 250 VAC, it suits drives, inverters and UPS systems, and can also be used in medical equipment.Products for Invertors
FMAB NEO Series with Compact Line Filter for Clean Power
SCHURTER FMAB NEO is a compact single-phase line filter that reduces mains interference in devices with switching electronics. Closed steel housing, Class I or II options, industrial or medical versions, 1–60 A at 250 VAC, -40 to 100 °C.FMBB NEO Series with Compact Mains Filter for Cleaner Power
SCHURTER FMBB NEO is a compact single-phase mains filter that reduces electrical noise from and to the grid. Made for drives, inverters and UPS systems, it covers 1–36 A and is also available for medical devicesFMAD NEO Series with 3-Phase Mains Filter
SCHURTER FMAD NEO is a compact 3-phase mains filter (with neutral) that cuts line noise and helps industrial equipment run smoothly. Designed for converters, drives and UPS systems. Rated up to 520 VAC, 16–230 A, with low-leakage options.FMBD EP Series with 3-Phase Mains Filter
SCHURTER FMBD EP is a compact 2-stage three-phase mains filter that helps keep equipment running clean and stable by reducing line noise. For 520/760 VAC, 16–230 A, with industrial or low-leakage versions and -40 to 100 °C range.Products for Voltage Drop Prevention & Energy Harvesting
SCHURTER prismatic supercapacitors, developed with CAP-XX, store energy in an ultra-thin, lightweight format and release it very quickly. They bridge the gap between capacitors and batteries, offering high power density, very low ESR, low self-discharge and long cycle life. SCPA is as thin as 0.4 mm. Typical uses include wearables, IoT sensors, medical devices, short backup and energy harvesting.
Products for User Interface & Process Control
PCAP Touchscreens with Custom Touch Panels for Demanding Environments
SCHURTER PCAP Touchscreens are custom touch panels. They work with gloves, support multi touch, and can be made water and salt water resistant. SCHURTER can integrate touch, display and electronics into one HMI for industrial or medical devices.
Membrane Switches with Custom Keypads for Reliable Operation
SCHURTER membrane switches are custom keypads for industrial and medical HMIs. They are slim and easy to mount, and can include a built-in numeric display for very low installation depth, with total thickness under 2 mm.
CPS with Capacitive Touch
SCHURTER CPS is a vandal-resistant capacitive touch switch with optional illumination. Stainless-steel housing, 5–28 VDC supply, potential-free OptoMOS output, plus IP67 (front) and IK09 protection for harsh industrial use.PSE with Piezo Technology and Cable
SCHURTER PSE with cable is a momentary normally open piezo switch for tough environments. It is IP67 sealed up to the cable connection, comes in a stainless steel housing, uses a potted PUR cable (15 m), and offers RGB ring illumination (5–28 VDC).Why are standards important for medical devices?
The medical standard defines the pinnacle of safety. Its implementation ensures optimized processes and consistent product quality—meeting the most demanding expectations.
Fill in the form and read more about the medical standard DIN EN ISO 13485 in our Application Note.
Certifications & Regulatory Compliance
Quality, safety, and environmental responsibility are central to SCHURTER’s operations. The company’s products comply with internationally recognized standards such as ENEC certification, RoHS, ISO 9001:2015, ISO 45001:2018, and IATF 16949:2016. These certifications reflect SCHURTER’s commitment to delivering reliable and compliant electronic components for use in medical, laboratory, and industrial applications.
SCHURTER has long prioritized sustainability. As early as 1999, the company launched initiatives to eliminate lead and achieve RoHS compliance ahead of industry regulations. By 2006, all product lines had transitioned to lead-free production without compromising on performance or quality. Today, extensive testing, continuous process optimization, and globally certified management systems ensure that SCHURTER products consistently meet modern demands in a safe and sustainable manner.
Share on LinkedinCopy link
Send via e-mail
CONTACT US